add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B5 (from 1996 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Passat B5
Home
 
Volkswagen
Passat B5
Instructions
Maintenance
Engines
Cooling
Fuel system
Motor Control
An exhaust system
Transmission
Chassis
Steering
Brakes
Body
general information
Care body
Care of an upholstery and rugs
Repair of insignificant damages of a body
Repair of strong damages of a body
The front transverse panel
Front bumper
Removal of the lever locks the hood
Adjust the side guides bumper bracket
Rear bumper
Front fender
Facing of a niche of a forward wheel
Air intake grille
Hood
Radiator grille
A cable of opening the bonnet
Hood lock
Interior finish doors
Differences at removal of an upholstery of the right front door
The control unit door mechanism
Door Seal
Lateral furnish of a luggage space of models the Sedan
Lateral furnish of a luggage space of models the Versatile
The rear luggage compartment trim models Sedan
Upholstery lid
Upholstery tailgate
Flooring luggage on Touring models
The trunk lid
Castle trunk
Adjusting trunk lid / tailgate
Lock the back door on models the Versatile
The front door
The cylinder lock of the front door
The external handle of the door opening
Door lock
Manual lowering of glass of a door
Glass doors
Bracket door
Interior rearview mirror
The center console
Front ashtray
Rear ashtray
Trim lever (automatic transmission)
Decorative overlays under a radio receiver
Lower trim the dashboard on the driver side
Glovebox
Inner escutcheon Door mirror
Ceiling handle
Sunshields
Sill
The windscreen and rear window
The front seats
Headrest
Side airbags
Rear seat
The left rear seat backrest
Carpet covering
Elements of interior decoration
Door mirror / mirror glass
Exterior mirror housings
Fencing / curb plank roof
Side Panel Body
Replacement of rubber tapes of brushes of screen wipers
Windshield washer nozzles
Wiper arms
Heating, ventilation
Electrical
 


Hit Counter by Digits


print page printable version

Facing of a niche of a forward wheel



Location fasteners facing of a niche of a forward wing

1 - lining the front wing niches,
2 - plastic nut,
3 - Phillips screws 9 pcs.
4 - a nut

The gap between the front of the body parts models Sedan

A - 1.0 mm
B - 2.5 mm,
F - 3.0 mm,
G - 3,5 mm,
H - 4,0 mm

Size of the gap between the components of the rear on models Sedan

A - 1.0 mm
F - 3.0 mm,
G - 3,5 mm,
K - 5.0 mm

The gap between the parts Car rear wagon

A - 1.0 mm
F - 3.0 mm,
G - 3,5 mm,
H - 4.0 mm,
K - 5.0 mm

Withdrawal

PERFORMANCE ORDER
1. Loosen the bolts of the front wheel, then lift the front of the car and fix on supports. Remove the front wheel.
9 2. Unscrew Phillips head screws securing the facing of a niche of a forward wheel.
3. From under the arches of the wing, remove facing of a niche of a forward wheel.

Setting

PERFORMANCE ORDER
1. Set the facing of a niche of the front wheel arch under the front wing and tighten the screws 9.
2. Install the front wheel, then lower the car on the ground. Tighten the wheel bolts in diagonal sequence the moment of 120 Nm.




« previos page
Front fender
next page »
Air intake grille

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.