 printable version
Wiper arms
Withdrawal
| PERFORMANCE ORDER | | 1. Turn on and turn off the wiper so that the wiper arm established in a starting position. |  | 2. On the windshield wiper unscrew the cover at the base of the wiper arm. |  | 3. On the rear window wiper to move up the enclosure situated at the base of the wiper arm. On some turns unscrew the wiper arm nuts. | | 4. Move the wiper arm to the side, loosen it landed on the line, then unscrew the nut and remove the wiper arm. |
|
Setting
The initial position of the wiper blade
| Wiper front window A = 20 mm.
Rear window wiper A = 20-30 mm. |
| PERFORMANCE ORDER | | 1. Install the wiper arm in such a position that the windshield wiper blade located at a distance of 20 mm from the windscreen, see. Fig. The initial position of the wiper blade. Rear window wiper arm set so that the wiper blade situated at a distance of 20-30 mm from the bottom edge of the glass. Secure the wiper arm nut, tightening it to a torque of 15 Nm. | | 2. Replace the bottom casing of the wiper arm. | | 3. Check the angle of the wiper arm and, if necessary, adjust it. |
|
|
