 printable version
Rear bumper
Rear bumper sedan models
1 - bumper,
2 - absorbing pad,
3 - bumper bracket,
4 - screws 2 pcs., 15 Nm
5 - 4 pcs bolts. 30 Nm + tighten on a corner 180 ?�,
6 - a nut, | 7 - screws 6 pcs., 2 Nm
8 - swivel arm,
9 - nut 6 pcs.
10 - foundation
11 - screws 4 pcs., 1.2 Nm,
12 - bumper attachment element,
13 - bolts 5 pcs., 6 Nm |
A warning  Padded pad 2 is attached to the bumper.
Removing the rear bumper must be made by moving it back parallel to the guide rails 8.
Rear bumper models Universal
1 - rear bumper,
2 - absorbing pad,
3 - bumper bracket,
4 - 2 pcs bolts. 15 Nm
5 - a nut,
6 - screws 4 pcs., 30 Nm + tighten on a corner 180 ?�, | 7 - screws 6 pcs., 2 Nm
8 - swivel arm,
9 - nut 6 pcs.
10 - foundation
11 - screws 4 pcs., 1.2 Nm,
12 - bumper attachment element,
13 - Screws 5 pcs., 6 Nm |
A warning Padded pad 2 is attached to the bumper. Removing the rear bumper must be made by moving it back parallel to the guide rails 8. When installing the bolts 6 is necessary to use new bolts.
This section set out the procedure for execution of works on models Sedan.
| PERFORMANCE ORDER | | 1. Remove the screws securing the side of the bumper | | 2. Remove the screws that secure the rear and bottom of the bumper (13). See Fig. Rear bumper sedan models. | | 3. Pull back, remove the bumper with guide rails. |
|
|
