 printable version
Replacement of rubber tapes of brushes of screen wipers
Regularly check the efficiency of the wiper blades. Friction brushes on the icy surface of the glass causes damage to rubber bands wiper. Dirty wiper blades with a soft cloth and a special tool. You need to replace brushes, whose rubber band hardened, cracked or covered with silicone.
Withdrawal
| PERFORMANCE ORDER | | 1. Raise the brush Windshield middle of the windshield. Turn the wiper blade at 90 ?� to the wiper arm. |  | 2. Press the lock brush Windshield heater (arrow A), then move the brush on the lever (arrow B) and moving it in the opposite direction, remove the wiper arm. |  | 3. Squeeze the two sides of steel amplifiers wiper rubber band and pull the rubber band from the end of the wiper brushes. |
|
Setting
Location recess to lock the wiper blade rubber band
| PERFORMANCE ORDER | | 1. Insert a new rubber tape without steel amplifiers into the lower clips of the wiper blade. | | 2. Insert steel amplifiers in the first groove of the rubber belt. | | 3. Pliers compress steel amplifiers together with a rubber band and put them in the top clamp of the wiper blade. This clip antennae must be logged in catches on the rubber band, see. Fig. Location recess lock on a rubber belt wiper. | | 4. Replace the wiper blades on the levers in the reverse order of removal. This latch must clearly indicate the brush on the screen wiper lever. | | 5. Lower the wiper arm on the windscreen. |
|
|
