Removing the clutch

Ctseplenie can be removed without removing the engine from the car. To do this, you must do the following:

- Remove the gearbox (Sect. 8.1);

- Mark the position of the clutch during assembly with respect to the flywheel. To do this, use the punch with which the labels are applied to the flywheel and clutch;

- Unscrew the six bolts securing the clutch crosswise to the weakening of the spring force. Flywheel when it is necessary to properly fix. It should be remembered that the screws 12-point, that is, for the breakout and tightening requires an appropriate head;

- Remove the clutch drive plate and remove the clutch.

- Just wipe with a cloth inside of the flywheel to check the flywheel friction surface. When worn drive disc clutch rivet heads may be that the rivets "pulled up" the surface of the flywheel or pressure plate.