 printable version
Check supply voltage
To check, perform the following:
| Fig. 127. Check power supply to an electric socket transformer ignition circuit: 1, 2, 3 - pins; 4 - the main power connector
|
- Disconnect the plug from the transformer. Install the plug in the position shown in Fig. 127, and connect a voltmeter to terminals 1 and 3; - Switch on the ignition and check that the voltage is at least 11 (it is usually equal to 12-14); - If the voltage reading is not present, then turn off the ignition and check the flow of current between terminal 1 and "weight".
| 
