Carrying out repairs and maintenance of the ignition system
When turning the engine if the HV cables may be damaged, some elements of the fuel injection and ignition. To avoid this, before carrying out repairs and maintenance of the ignition system, do the following:
- A 2.0-liter engine, turn off the ignition and remove the three-pin plug connector from high-voltage transformers, as well as the plug connector of the engine speed sensor;
Fig. 212. blackout transformer high voltage disconnect the 5-pin connector (motor VR6)
- On the VR6 engine, disconnect the plug five-pin connector (Fig. 212)
from the high voltage transformer.
If repair work is necessary to strictly observe safety precautions. If the following checks will not give any results, reference is made to the service station, to check the ignition system with the help of computer memory.