printable version
Verifying stoplights
Vehicle brake light switch is activated using brake, which is attached to the pedal bracket. When you press the brake pedal spring translates the pin switch in the "on" position, the switch contacts close the circuit brake stoplights. Good visibility stoplight is provided using a ball incandescent 5 W, clear glass and the normal value in the lantern light bulbs. The efficiency of the brake light is easily verified. To do this you need to put the car back to a garage wall and press the brake pedal. On the wall to appear red glow of brake lights included. If one of the brake lights do not work, try replacing the bulb. If out of order, both stoplight, you might have a defective fuse or circuit breaker brake, as very rarely happens that both lamps simultaneously burned. If the brake lights are not switched off, and the incandescent lamp, the connection terminals for the wires and fuses are in good condition, it may be faulty brake switch.
|