printable version

Replacing fuses

Relays and fuses

In order to prevent damage to wires or consumers as a result of a short circuit or overload, the individual circuits are protected by fuses. Applicable fuses meet the high technical requirements. They are equipped with blades and can not be replaced by fuses used previously. Relays and fuses are in the same box, closed the lid and placed on the left of the instrument panel.

PERFORMANCE ORDER

1. Rasstoporit cover by turning the key 90 ?° (1/4 turn) to the left or right. Fold the cover down. 2. Before replacing the fuse, turn off the appropriate consumer. 3. Blown fuse can be seen on the fused metal strip. Location main fuse is indicated on the reverse side of the cover and in the instructions for operating the machine. 4. Remove the defective fuse. 5. Install a new fuse of the same amperage. 6. If, after a short time the new fuse blows, check the appropriate circuit. 7. In no case is not installed fuse wire. This can lead to failure of the electrical system. 8. It is advisable to carry spare fuses in the car, designed for various current. 9. Rated current (A) Fuse embossed on the back of the neck (indicated by the arrow symbol). In addition, the neck has a color identification on which you can also define the rated current. 10. Raise and close the lid.