REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Hyundai
	Accent
		Instructions
		Engine
			Engines SOHC
			Engines DOHC
				Technical data
				Compression Test
				Toothed belt
				Ribbed Belts
				Engine Supports
				Front Cover
				Air filter (ACL)
				Cylinder head
				Camshafts
				Replacing the valve seat
				Replacing the valve guide
				Valve
				Cranks
				Crankshaft
				Flywheel
				Piston
				An exhaust manifold
				Intake manifold and the air chamber
				Cylinder block
				Removing and installing engine and gearbox
				Exhaust
				Troubleshooting
		Greasing system
		Cooling
		Control, reduced toxicity
		Fuel system
		Ignition system
		Coupling
		Transmission
		Axes and power shafts
		Suspension
		Steering
		Brakes
		Body
		Air
		Electrical equipment
		Appendix
		Wiring

Intake manifold and the air chamber

1 - intake manifold;
2 - a bolt, 15-20 N ??? m;
3 - throttle device;
4 - bolt, 15-20 N ??? m;

5 - a lining;
6 - the fuel line;
7 - Air compensation chamber.

Withdrawal

PERFORMANCE ORDER

	1. Disconnect from air flow meter sensor and throttle position.
	2. Remove the air inlet connected to the throttle assembly.
3. Remove the accelerator cable.
4. Remove the crankcase ventilation hose and the vacuum hose of the vacuum brake booster.
5. Disconnect the vacuum hose connections.
6. Remove the support of the air chamber.
7. Remove the air chamber and gasket.
8. Disconnect the wiring harness connector from the fuel injector.
9. Remove the fuel line to the fuel injectors.
	A warning Be careful not to drop the fuel injectors when removing fuel line.
10. Remove the insulator from the intake manifold and remove the heater hose.
	11. Remove the intake manifold.

Check

PERFORMANCE ORDER

1. Check the airbag for defects or cracks.

2. Inspect the intake manifold for damage or cracking of any part.

3. Check the air pipe for damage or cracking of any part.

Setting

PERFORMANCE ORDER

	1. Install the fuel line with a fixed thereto fuel injectors.
A warning Be careful not to drop the fuel injectors when removing fuel line.
2. Check that the isolators are properly inserted into the holes of the fuel line.