add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Accent (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Accent
Home
 
Hyundai
Accent
Instructions
Engine
Greasing system
Cooling
Control, reduced toxicity
Fuel system
Technical Specifications (SOHC and DOHC)
Checking the fuel pump
Checking the pressure created by the fuel pump
Verification system of injection MFI
The control lamp fault (MIL)
DTCs ?�OBD-II?�
DTCs except ?�OBD-II?�
Replacement of the fuel filter
Replacing the overflow limiter (two-way valve)
Replacing fuel level sensor
The engine management system MFI
Fuel injectors
Throttle knot
The power supply system with the carburettor
Check idle speed
Adjusting the idle speed
Speed of idling and adjustment of the fuel mixture
Check and adjustment of the starting device
Check and adjustment of a free wheeling of a cable of an accelerator
Fuel tank
EVAP canister
Replacement of the fuel filter
Carburetor
Cable and accelerator pedal
Troubleshooting Fuel system with the carburettor
Ignition system
Coupling
Transmission
Axes and power shafts
Suspension
Steering
Brakes
Body
Air
Electrical equipment
Appendix
Wiring
 


Hit Counter by Digits


print page printable version

Throttle knot



1 - the screw (not adjustable);
2 - the switch, only for vehicles with automatic transmission;
3 - throttle device;
4 - bolt, 15-20 N ??? m;
5 - a lining;
6 - airbag.

Withdrawal
A warning

The throttle should not be removed.


Remove the throttle position sensor.

A warning

Removing the throttle position sensor is carried out only to replace it.



Check

PERFORMANCE ORDER
1. Check the throttle assembly for cracks.
2. Check the cleanliness of the vacuum channels.
3. Check the accelerator cable play.

A warning

Set screw the throttle has been adjusted on the line with an air volume of 0,516 ?� 5% g / s, it is not recommended to adjust it yourself.
If the idle speed does not conform to the required primarily check the corresponding sensors.
Not required to clean carbon deposits in the throttle assembly, since it does not affect the operation of the fuel system.






« previos page
Fuel injectors
next page »
The power supply system with the carburettor

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.