Engine Supports

Fix the clamps lifting mechanism for the eye and lift the engine so that the engine weight was perceived by the load-lifting mechanism.

2. Remove the engine support from engine.

4. Remove the bolt transmission.

5. Unlock the right wheel arch. Remove the bracket bolts gearbox.

7. Remove the upper and lower mounting bolts the front engine mounts. Remove the front engine support.

8. Remove the bolt and remove the back support of the engine to the bottom of the frame.

2. Install the roller retainer.

3. Set at a certain angle the front engine mounting.

Cars with automatic transmission: 30 ?� 3 ?�
Vehicles with manual gearbox: 14 ?� 3 ?�

4. Set at a certain angle the back support of the engine.

Cars with automatic transmission: 33 ?� 3 ?�
Vehicles with manual gearbox: 20 ?� 3 ?�

1. On the upper side of the front and rear cross members are two arrows, determine the position of the sleeves.

2. When installing the plugs into the slots on the crossbars align the arrow with the direction of the lateral bushing elements.

Make sure that the sleeves are arranged in parallel side members cross. Make sure that the direction of fitting sleeves does not deviate by more than ?� 3 ?� from the side member.