add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
eleven Technical specifications of petrol engines
Compression Test
Toothed belt
Adjusting the tension of the toothed belt
Adjusting V-belt tension
Adjusting the tension of the alternator drive belt
Camshafts
Check and adjustment of backlashes of valves on engines of 1.8 and 2.0 liters (MLA)
Hydraulic jacks of backlashes of valves of the engine of 1,6 l
Install the cylinder head cover
Chain guide
Chain
Installation of camshafts
The mechanism of change of the moment of opening and closing of valves (CVVT) on engines of 1.8 and 2.0 liters
Repair of a head of cylinders
Engine Supports
Removing and installing engine and gearbox
Cylinder block
Crankshaft
Flywheel
Piston
Air filter (ACL)
An exhaust manifold
Intake manifold
Exhaust
Troubleshooting
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Exhaust



Withdrawal

The main silencer

Before removing or inspecting elements of the exhaust system, make sure that it is sufficiently cooled.


PERFORMANCE ORDER

  1. Disconnect the muffler from the central tube.
  1. Remove the rubber suspension and main silencer from the vehicle.

Central Silencer

PERFORMANCE ORDER

  1. Separate central muffler from a reception exhaust pipe and main silencer.
  1. Remove the rubber suspension and a central exhaust pipes from the vehicle.

Reception exhaust pipe

PERFORMANCE ORDER

  1. Separate reception exhaust pipe from the catalytic converter or exhaust manifold.
  2. Remove the front exhaust pipe clamp bolt and nut center muffler.

Check

PERFORMANCE ORDER

  1. Check mufflers and pipes for corrosion and damage.
  1. Check the rubber suspension in the absence of aging and cracking.

Setting

PERFORMANCE ORDER

  1. Temporarily install the assembly reception exhaust pipe, center and rear mufflers.
  2. Tighten the connection elements of the exhaust system. Moving to the side exhaust system of a vehicle, make sure that it does not touch the body of the car. Otherwise, replace the rubber suspension of the exhaust system.




« previos page
Intake manifold		 next page »
Troubleshooting

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.