 printable version
Principle of operation and check of serviceability of electric repositioning seats
Special electric seat allows you to adjust the position of a very small effort. These models are equipped with seats, with six degrees of freedom and can correspondingly move back and forth, up and down, and lean forward and backward. The seats are equipped with three reverse-type motors, placed in a common housing and control switches, fixed on the side of the seat. Each of the switches used to change the polarity on your motor, respectively, defining the direction of the shift or tilt of the seat. Troubleshooting actuator is quite simple and is carried out by performing the procedures described below. | - Look under the seat to the sunset in search of an object that can interfere with the movement of the seat.
- If the power seats are not functioning at all, check the condition of the circuit breaker 30 A (?�� 25) in the mounting fuse.
- Turning off in order to reduce background noise engine popereklyuchayte switches in both directions drive seat, listening to the sounds of the drive motors to publish.
- If the motor does not work or makes unusual noises, check the voltage on it, is an assistant will toggle switch.
- If the power supplied to the motor, but it does not rotate, remove it from the car and check feeding power directly from the battery. If you turn on the motor does not occur now, replace it.
- If power is not available, remove the switch and check it. If the voltage on the switch is missing, check the condition of the wiring between switch and fuse box mounting. If there is a voltage on the red wire switch, check the circuit breaker. Check the black wire and, in the absence of its conductivity, replace the switch. If the switch is in order, check the wiring between them and the motor for an open or short circuit.
- Repeat function test drive after making appropriate corrections.
|
|
|
