 printable version
Replacing bulbs
Front turn signal / marker lights | - Give fixing screws, remove the housing Indicator, turn the cartridge counterclockwise and remove the bulb.
 | Details setting Indicator lamps. |
- Take the screws and remove the case of side light, providing access to the lamp.
 | Details of installation of the lamp marker light. |
- Install in reverse order.
|
|
Taillights / brake lights / blinkers | - Give bolts and remove the cover taillamp.
 | - Give bolts and remove the case rear position lamp by pulling it straight back.
|
- Turn the bulb holder anticlockwise and remove it from the rear of the chassis. Push in and turn counterclockwise direction indicator lamp, the stop lamp and taillamp to extract them from their rounds.
 | - Turn the lamp holder and remove it from the lamp assembly - push the lamp inside and turning, remove the cartridge.
|
- Install in reverse order.
|
|
Stoplights top level | - Open the tailgate. Give the screw and lift, remove the cover. Remove the cartridge and replace the bulb by pulling it straight up to remove. On models of the last years of release, remove the cover, give the two screws and remove the casing, turning it, and then turn the chuck counterclockwise to remove it and remove it by pulling it straight up.
 | - Remove the cartridge, and then grab the bulb and pull it out of the holder in the upright direction.
|
- Install in reverse order.
|
|
Instrument lighting License plate light | - Take the screws and remove the bracket plate license plate, then remove the bulb from the socket under the bracket.
 | Details of installation lamp light plate. |
- Install in reverse order.
|
|
Interior lighting | - Having hooked, remove the bowl from the body of the lamp.
- Unplug the lamp from the terminals. You may have to pry the lamp arm - rests with the latter only at the edge of the lamp, so as not to damage the glass bulb.
 | Details of installation of the light bulb luggage. |
 | Details of installation of interior light. |
- Install in reverse order.
|
|
|
