add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Magentis / Optima (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Magentis
Home
 
Kia
Magentis
Engines
Lubrication System
Cooling system
The control and toxicity
Fuel system
Ignition system
Coupling
Transmission
Power shafts, axles
Suspension
Steering
Brakes
Technical data
Anti-lock brakes
Checking and adjusting the brake pedal position
Check the brake servo
Bleeding the hydraulic system of a drive of brakes
Bleeding the hydraulic system of a drive of brakes with scanner use
Adjust the parking brake stroke
Brake pedal
The main brake cylinder
Vacuum brake booster
Brake tubes and hoses
Pressure regulator
Replacing the front brake pads
Caliper front brake
Rear drum brakes
Replacing the working brake cylinder
Rear disc brakes
Saddle
Hydraulic block HECU (the hydraulic and electronic control unit)
Wheel speed sensor
Parking brake
Troubleshooting
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Technical data



The main brake cylinder

- type

Tandem

- Bore mm

CBS
23.8
ABS
25.4

Vacuum brake booster

- type
Vacuum
- Effective diameter, mm
CBS
177.8
ABS
203.2
- ratio
CBS
7.0: 1
ABS
7.5: 1

The pressure

- Start pressure, MPa
3.43
- The ratio of decompression
0.32: 1

Front brakes

- type
Disk, ventilated
- The diameter of the brake disc, mm
257
- The thickness of the brake disc, mm
24.5
- Brake pad thickness, mm
eleven
- Bore mm
57.2

Rear drum brakes

- The inner diameter of the brake drum, mm
228.6
- Brake pad thickness, mm
5
- Bore mm
19,05

Rear disc brakes

- The diameter of the brake disc, mm
262
- The thickness of the brake disc, mm
10
- Brake pad thickness, mm
10
- Bore mm
34
Anti-lock brakes

The control unit ECU

- Supply voltage, V
10-16
- Temperature range, ? C
- 40 ... 110

Control lamp: W / ABS, TCS, TCS OFF, EBD

- Supply voltage, V
12
- Current consumption, mA
80

Wheel speed sensor

- Resistance, Ohm
1275-1495
- Output voltage, V
0,15-50
- An air gap, mm
0.2-1.2

Hydraulic block HECU

- Weight, kg

thirty

- engine
12, 35 A
- Engine power, W
180
- Productivity in cm 3 / s
5.5

Adjusting data

Installation height of the brake pedal, mm

176 ? 0,3
Clearance brake light switch, mm
0.5-1.0
The free pedal travel, mm
3-8
The distance from the brake pedal to the floor, mm
44
The gap between the brake servo pushrod and the brake master cylinder, mm
0
Progress parking brake lever while tightening its force 196 N
8-9 clicks
Minimum thickness pads front brake pads, mm
20
Minimum thickness of a brake disk, mm
22.4
Palpation of a brake disk, mm
0.08
The minimum permissible difference in the thickness of the brake disk, mm
0.01
Minimum thickness pads rear brake pads, mm
15
The maximum diameter of the bore of the brake drum, mm
229.6
The maximum allowable gap in the working piston brake cylinder, mm
0.15
Minimum thickness pads rear disc brake pads, mm
20

Lubricants

brake fluid DOT 3 or equivalent
Bushing and bolt of the brake pedal Lubricant SAE J 310, NLGI ?0
The pin head and the cotter pin hole Lubricant SAE J 310, NLGI ?2
The contact surface of the base plate The lubricant for the bearings NLGI ?0
Movable elements ratchet or pawl ratchet. Lubricant SAE J 310, NLGI ?2

Tightening torques, N ??? m

Nuts of fastening of the main brake cylinder to the bracket

8-12
Nuts bracket brake master cylinder
13-16
Fitting the vacuum hose to the air expansion chamber
15-18
Bleeder valve
7-13
Connecting the brake pipe nuts
13-17
The pressure to the master cylinder
35-55
Bolt the caliper guide bushing
22-32
Caliper mounting bolts to the steering knuckle
69-85
Banjo bolt brake hose for Front Caliper
25-35
Bolts of fastening of the working brake cylinder
12-18
The front wheel speed sensor
8-9,5
Rear wheel speed sensor
15,5-16,5
Bolts control unit ECU and Hydraulic block HECU
8-10
Bracket bolts of the control unit ECU and Hydraulic block HECU
9-10
Six brake pipes to the hydraulic unit
13-17





« previos page
Brakes
next page »
Anti-lock brakes

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.