1. Lift the car and fix on support. |
2. Remove the seven screws and remove the mudguard of a motor compartment. |
3. Remove the cap from the bleeder, and connect to it a hose. |
| 4. Place the other end of the hose in a glass container of sufficient volume. |
5. Slowly press the clutch pedal several times. |
6. While pressing the clutch pedal, loosen the bleeder valve and release the air from the hydraulic system. |
7. Tighten the bleeder valve and release the clutch pedal. |
8. Repeat steps 5-6 until the until the brake liquid without air bubbles. |
9. Check the operation of the clutch. |
10. Screw the cap on the bleeder valve. |
11. Install the mudguard of a motor compartment and secure it with seven screws. |
12. Lower the car. |