REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
			Technical data
			Bleeding the hydraulic clutch
			Adjust the clutch pedal
			The clutch pedal
			Clutch Master Cylinder
			Clutch slave cylinder
			Clutch disc
			Checking release bearing
			Check of a casing of coupling with a press disk
			Check clutch
			Check of the central bearing
			Check the flywheel
			Repair of the clutch master cylinder
			Repair of the working cylinder of coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

Check the flywheel

PERFORMANCE ORDER

	1. Check the condition of the friction surface of the flywheel for cracks, metal penetration and wear surfaces. The following slight generation or burning should be removed with sandpaper.
2. Check the condition of the teeth of the flywheel for wear and chipping. If necessary, replace the flywheel.

Setting

PERFORMANCE ORDER

	1. A hammer and tubular mandrel set the central bearing. The outer diameter of bearing 35 mm.
2. Clean the threads of the mounting bolts of the flywheel of the hermetic rests. Before screwing bolts put on a carving of bolts fresh hermetic.
3. Establish a flywheel and special adaptation OK590 111 004, safeguarding it against rotation.
	4. In certain sequence tighten bolts of a flywheel. Torque: 96,1-103,0 N ??? m
5. Clean the spline on the clutch and apply a thin layer of grease on the basis of molybdenum disulphide.
	6. Install the drive coupling and center its special mandrel OK130 160 010.
7. Install the clutch cover with a press disk on directing pins of a flywheel.
	8. Gradually, in diagonal sequence and in a certain order, tighten the flywheel bolts. The inhaling moment: 17,6-26,5 N ??? m
9. Install the gearbox.