REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
			Technical data
			Bleeding the hydraulic clutch
			Adjust the clutch pedal
			The clutch pedal
			Clutch Master Cylinder
			Clutch slave cylinder
			Clutch disc
			Checking release bearing
			Check of a casing of coupling with a press disk
			Check clutch
			Check of the central bearing
			Check the flywheel
			Repair of the clutch master cylinder
			Repair of the working cylinder of coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

Clutch disc

A warning

Remove the slave cylinder connected to a hydraulic tube. Needlessly do not remove the central bearing.

Clutch disc

1 - clutch slave cylinder;
2 - the transmission housing;
3 - a protective cover;
4 - clutch;
5 - clutch fork;

6 - clutch cover and the pressure plate;
7 - disc clutch;
8 - the central bearing;
9 - flywheel

Withdrawal

PERFORMANCE ORDER

1. Remove the gearbox.
	2. Install special tool OK590 111 004 for blocking of a flywheel from turning the mandrel and OK130 430 010 for centering the clutch.
3. Gradually loosen the bolts diagonally clutch assembly, turning each bolt 1/2 of a turn, as long as the action does not stop the diaphragm spring and bolts can be unscrewed by hand. Remove the clutch cover with the pressure plate and clutch disc.
	4. If necessary, a special tool OK401 111 012 remove the central bearing.
A warning It is desirable to remove the flywheel and check the back sealing ring of the crankshaft for leaks. If necessary, replace the O-ring.
	5. The indicator of hour type measure palpation of a flywheel. If the runout exceeds the limit, replace the flywheel. Heartbeat: 0.2 mm
	6. Establish special tool OK590 111 004 for blocking of a flywheel from turning, remove the six screws and remove flywheel.