1. Install the instrument panel in the car. Make sure the steering wheel is correctly installed through a T-shaped rod with wiring harness before installing the instrument panel. Otherwise, the steering column may not be properly installed. |
2. Connect the wiring harness connector and the instrument panel. |
3. Replace the two screws on either side of the steering column, that hold the steering column and instrument panel.
Torque: 18-26 N ??? m |
4. Replace the three screws on the right side of the instrument panel. Torque: 18-26 N ??? m |
5. Replace the two screws on the right side of the T-shaped connector. Torque: 18-26 N ??? m |
6. Fit the front passenger airbag. Torque: 18-26 N ??? m |
7. Set the center trim panel. |
8. Install the glove box. |
9. Install control panel heating and ventilation. |
10. Install the trim center console. |
11. Install the ashtray. |
12. Replace the two screws on the left side of the instrument panel. Torque: 18-26 N ??? m |
13. Replace the two screws on the left side of the T-shaped connector. Torque: 18-26 N ??? m |
14. Install the bottom panel trim on the left side of the instrument panel. |
15. Install the T-connector and secure with two bolts. |
16. fix the nut cover of a cable of opening the bonnet to the dashboard. |
17. Set the handle of opening the bonnet. |
18. Establish a steering wheel, turn signal switch, and the upper and lower casings of a steering column. |
19. Install the driver airbag. |
20. Install the central console. |
21. Connect the cable to the negative terminal of the battery. |