printable version
Hood
Hood
1 - WATERPROOF band; 2 - Rubber Stop; 3 - Joint hood; 4 - hood; 5 - support the hood; | 6 - the holder supports the hood; 7 - a cable of opening of the bonnet; 8 - hood latch (latch); 9 - windshield washer hose |
Withdrawal
PERFORMANCE ORDER | 1. Open the hood and fix it on a support. | 2. Support the hood so that it does not fall after reversing of bolts of hinges. | Attention Removing the hood spend with assistants.
| | 3. Remove the four screws on the hinges of the hood. | 4. Separate support the hood from the hood. | 5. Remove the hood. |
|
Setting
Attention The installation of the hood spend with assistants.
PERFORMANCE ORDER | 1. Installation is spent to sequences, return to removal. | 2. Tighten the bonnet by hand. | 3. Close the hood. | | 4. Check the clearance around the perimeter of the hood. If necessary, moving the hood to the elongated holes for bolts fastening the hood, adjust the hood so that the gaps around the perimeter are uniform and consistent with the desired value. After adjusting the position, tighten the screws of the hood.
Torque: 18-26 N ??? m | | 5. Check the alignment of the locking mechanism and a shock plate of the hood. If necessary, loosen the bolts and moving, adjust the shock plate hood. Torque: 8-11 N ??? m |
|
|