add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Sephia / Shuma
Home
 
Kia
Sephia / Shuma
Maintenance
Engine
Greasing system
Cooling
The power supply system and release
Fuel system
Ignition system
Coupling
Manual transmission
Automatic Transmission
Axes and power shafts
Steering
Wheels and tires
Brakes
Suspension
Body
Technical data
Front bumper
Rear bumper
The front door
Conformal door seal
Door hinges and door lock strike plate
Door lock
Inner Door handle
The outer door handle
Cylinder door lock
Window switches
Power windows
Glass doors
Backdoor
Spotlight
High level brake light
The rear combination lamp
Ceiling
Hood
Sound signal
Device combination
Repair of the instrument cluster
Replacing bulbs dash
Printed circuit board
The top decorative overlay of the panel of devices
Switches
The central panel
Cover center console
The center console
Dimmer dashboard
The left and right lattices of a heater of a windscreen
The left and right lateral lattices of a heater
Ducts heating and ventilation systems
Floor ducts
Glovebox
A cable of opening the bonnet
Handle opening the bonnet
Dashboard
The control panel heating and ventilation
Door mirror
Replacing the glass door mirror
The front seats
Upholstery front seatback
The upholstery of the front seat
The leaning back hinge of a forward seat
Rear seat
Seat belts
Lock the front seat
Front shoulder belt
Rear seat belts
Bracket rear seat belt
Shoulder rear seat belt
The top furnish of a forward rack
The bottom furnish of the central rack
The top furnish of the central rack
Finish the back of the rack
Finishing stand legs
Front side door trim
Rear door trim
The trunk lid
The hinge lid
Windshield washer hose
Engine windshield washer
Wiper Arm
Sprayers
Replacing the wiper blades
Traction wiper
Wiper Motor
Distances between body points
The air conditioning system
Electrical equipment
 


Hit Counter by Digits


print page printable version

The top furnish of the central rack



Withdrawal

PERFORMANCE ORDER
1. the removal tool finishes release clamps of fastening the lower B-pillar trim.
2. Remove the bottom furnish of the central rack.
3. Remove the seat belt anchor bolt in the following order:
a. Separate the belt;
b. Turn out one bolt.
4. Remove one screw fastening of the top furnish of the central rack.
5. The tool for removal of finishing release clamps of fastening of the top furnish of the central rack.

Setting

PERFORMANCE ORDER
1. Install the upper B-pillar trim in place.
2. Replace the screw fastening of the top furnish of the central rack.
3. Screw the anchor bolt belt in the following order:
a. Replace the seat belt anchor bolt:

Torque: 38-78 N ??? m
b. fasten seat belt.
4. Install the lower B-pillar trim in place.
5. Press the bottom furnish of the central rack until it snaps into clips.




« previos page
The bottom furnish of the central rack
next page »
Finish the back of the rack

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.