printable version
The trunk lid
1 - latch the trunk; 2 - pull the trunk latch; 3 - lock cylinder trunk; 4 - pad tailgate; 5 - an emphasis tailgate; | 6 - the tailgate; 7 - the block of springs and hinges; 8 - shaped sealing strip; 9 - shock plate lid; 10 - release lever lid; 11 - wire trunk latch opening |
Withdrawal
PERFORMANCE ORDER | 1. Disconnect from the lantern light plate, then remove the harness from the trunk lid. Attention Removing the lid spend with the assistant.
| 2. Support the boot lid in the open position. | | 3. Remove the four screws on the tailgate hinge. | 4. Remove the trunk lid and the moisture seal with the lid. |
|
Setting
Attention Removing the lid spend with the assistant.
PERFORMANCE ORDER | 1. Installation is spent to sequences, return to removal. | 2. Hand tighten the bolts fastening lid hinges. | 3. Close the lid of the trunk. | 4. Check and, if necessary, adjust the position of the lid relative to adjacent surfaces before tightening the bolts. Torque: 9-13 N ??? m | | 5. Check the relative position of the lock lid and lock the shock plate. If necessary, loosen the bolts and moving the shock plate, adjust its position.
Torque: 7-10 N ??? m |
|
|