 printable version
Removing and installing Thermoscreens and housings
The exhaust system while the engine is hot. Therefore, when a mechanical failure or severe corrosion Thermoscreens installed in the engine compartment between the elements and the base body, be sure to replace them. In addition to reducing the level of comfort in the cabin, the fault termoekrana exhaust manifold may cause a fire in the engine compartment, and the fault termoekrana additional muffler can cause fire termoshumoizolyatsii floor pan and the fuel tank.
To remove the exhaust manifold termoekrana you need a key "10". 1. Disconnect a wire from the plug ?�-?� the storage battery. |
| | 4. Remove the five bolts to the exhaust manifold termoekrana ... | 5. ... and remove termoekran. |
6. Set termoekran in reverse order of removal. |
To remove the additional muffler housings set the vehicle on a pit or hoist and do the following. | | 1. Remove the two nuts securing the rear housings ... | 2. ... and remove the pins from the pressure plate housings. |
| | 3. Remove the clamp bolt front mounting housings ... | 4. Lift the collar ... ... |
| | 5. ... and remove the clamp with an additional silencer. | 6. Remove the additional muffler housings. |
NOTE So look the details of the additional muffler housings. |
7. Install additional muffler housings in the reverse order of removal. |
To remove termoekrana additional muffler, do the following. | | 1. Remove the two screws on termoekrana to the body panels. | 2. Remove the nut studs termoekrana to the fuel tank ... |
| 3. ... and remove termoekran they cast him out of the additional muffler. |
4. Install termoekran in reverse order of removal. |
NOTE It looks like termoekran additional muffler. |
| 
