add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Spectra (2004 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Spectra
Home
 
Kia
Spectra
Device Car
Operating Guidelines
Faults in the way
Maintenance
Engine
Design Features
Possible engine malfunction, their causes and remedies
Useful tips
Compression check in cylinders
Removal and installation of decorative engine cover
Removal and installation of mudguards of the engine
Mount Replacement power unit
Replacement of a protective timber
Installation of the piston of the first cylinder to TDC of the compression stroke
Replacing the timing belt
Replacing the support rollers and tensioning the timing belt
Removing, Troubleshooting and installation of a flywheel
Replacement parts Seal Engine
The cylinder head of the engine
Removing and installing engine
Lubrication system
Engine cooling system
Exhaust System Engine
Design Features
Replacement cushions suspension exhaust system
Removing and installing exhaust manifold
Substitution of the catalyst
Replacement of the additional muffler
Substitution of the intermediate tube
Replacement of the basic muffler
Removing and installing Thermoscreens and housings
The power supply system of the engine
Transmission
Chassis
A steering
The brake system
Electrical
Body
Car Care
Purchase of spare parts
A trip to the STO
Winter car operation
Preparation for technical inspection
Applications
Diagrams
 


Hit Counter by Digits


print page printable version

Replacement of the basic muffler



1. Place the vehicle on a pit or hoist.
2. Remove the two nuts and remove the silencer from the additional (see. "Replacement of the additional muffler").
Replacement of the basic muffler
Replacement of the basic muffler
3. Remove the front bracket of the silencer pad.
4. Hold the silencer, remove the bracket from the rear of the main silencer pad ...
Replacement of the basic muffler
5. ... and remove it.

HELPFUL ADVICE
Laying the silencer at each dismantling of the compound replaced.

6. Install the main silencer in the reverse order of removal.




« previos page
Substitution of the intermediate tube
next page »
Removing and installing Thermoscreens and housings

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.