printable version
The unit of the airbag on the steering wheel
Withdrawal
PERFORMANCE ORDER | 1. Turn off the ignition, put the key in the "O" position. | 2. Remove the battery ground cable (-). A warning This erases the drive fault in the engine or the anti-theft code for the radio. Before disconnecting the battery, read the instructions of sub-section 14.1.7.
| | 3. Remove the 2 bolts of the airbag unit left and right on the back of the steering wheel, while holding the unit. | 4. Remove the unit from the steering wheel and remove the plug wires on its reverse side. |
|
Setting A warning If the airbag was inflated, replace the steering wheel. Follow the instructions for dealing with a pillow.
PERFORMANCE ORDER | 1. Connect the power connector to the power of the airbag, thus will hear. | 2. Insert the unit, tighten the two mounting screws to a torque of 6 Nm | 3. Connect the battery ground cable (-). | 4. If available, set the time on the clock, as well as anti-theft code for the radio. |
|
|