Troubleshooting in the system of the central lock

1. First, find out which of the parts of a system fault has occurred: in the electric or pneumatic. To do this, listen, turns on whether the back of the pump by turning the key or pressing the remote control button.

2. If the pump does not work, check the power supply. Perhaps the pump runs at the close of a different place. This indicates that the probability of failure of the corresponding contact on or disconnect the wiring of the connection.

3. If the pump is running, but the lock does not occur, the system is leaking. Perhaps somewhere disconnect a hose or a crack in the membrane of one of the drive mechanisms.

4. To determine the place of a simple decompression remove all mats from the salon and in turn remove the hose connectors, leading to the door mechanism. At the same time close the connection of the hose in the direction of the pump.

5. If the lock is suddenly triggered leakage search should be conducted in just off the circuit.

6. If it fails to lock on to a single door, check the free running of the drive mechanism of the castle. On the mechanism of the fuel filler flap check the free running of the locking pin in the guide sleeve.