REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	G-class
		Introduction
		Controls and operation receptions
		Current care and maintenance
		Engine
		System of cooling, heating, ventilation and air conditioning
		The power supply system and exhaust
			General information and safety measures
			The power supply system of petrol engines
			The power supply system of diesel engines
				Overview
				Checks fuel injection system
				Service components of an inlet air path
				Service components of the throttle
				Emptying the fuel tank
				Removal and installation of the gauge of a stock of fuel
				Removal of air from a contour of low pressure fuel path
				Removal and installation of the fuel pump prior
				Removal and installation of the fuel pump (high pressure pump)
				Removal and installation of a fuel distributive highway and injectors
				Removal and installation of the pressure sensor in the fuel line
				Removal and installation of the valve, the fuel pressure regulator
				Removal and installation of the valve assembly
				Removing and installing fuel cooler
				Removal and installation of low-temperature cooler
				Removing and installing fuel injection control module
				Removing and installing fuel tank
			Exhaust systems and reduce emissions
		Systems of an electric motor
		Automatic Transmission
		Transmission Line
		Brakes and auxiliary systems
		Suspension and steering
		Body
		Onboard electric
		Wiring

Removing and installing fuel cooler

Details installing fuel cooler models 463.323 (M612)


1 - the fuel hose 2 - removing the fuel hose 3 - Coolant Hose	4 - Hose coolant 5 - Fuel cooler 7 - Fastening bolts

PERFORMANCE ORDER

Open the hood and fix it in an upright position.
Remove the trim panel of the cylinder head cover.
Drain the coolant from the radiator.
Disconnect the plug and plug the fuel hose (1) to the cooler (5).
Disconnect from the cooler and immediately plug the hose outlet of fuel (2).
Clamp and disconnect the fuel drain hoses (2) and the coolant (4).
Remove the mounting bolts (7) and remove fuel cooler assembly (5), disconnected from her water feed pipe (3).
Installation is in the reverse order.
Finally, start the engine and check for signs of leakage components of the power and cooling of the engine.