add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Nissan Sunny
Home
 
Nissan
Sunny
Instructions
Maintenance
Engines
Cooling
Heating and ventilation system
Fuel and exhaust system
Carbureted engines
Technical data
Air filter
The thermostat air flow
Fuel pump
Fuel Level Sensor
Fuel tank
The accelerator cable
Throttle pedal
Fuel
Carburetor
Sensors and valves carburetor
Suction collector
An exhaust manifold
Exhaust system
Engines with fuel injection system
The power supply / exhaust
Emission of exhaust gases
The system of the engine is started
Coupling
Transmissions
Axles
Brakes
Suspension and steering
Body
Electrical
 


Hit Counter by Digits


print page printable version

Fuel tank



Withdrawal

PERFORMANCE ORDER
1. Before removing the fuel tank drain as much gasoline. It is advisable to empty the tank of the trip, as the drain plug is not provided.
2. Disconnect the battery from weight.
3. Lift the rear of the car and establish on supports.
4. Disconnect from the body filler neck.
5. Disconnect the fuel hoses.
6. Place a container under the support (preferably a cart with a jack).
7. Remove the bolts of the front heat shield (if fitted).
8. Disconnect from the fuel gauge.
9. Remove the bolts from the tank.
10. Slowly lower the tank, disconnecting the ventilation tube as access.
11. Remove the tank, mark and remove the rubber pads.
12. Rinse the tank and inspect.
13. Buck-piece, made of plastic, so if damaged it must be replaced.

Setting

PERFORMANCE ORDER
1. Installation is performed in reverse order.
2. Check that all hose laying, take care that that was not pinched.
3. Before the trip, make sure there are no leaks of fuel.




« previos page
Fuel Level Sensor
next page »
The accelerator cable

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.