| 1. Disconnect the battery from weight. |
| 2. Remove the back seat (see. Subpart 13.23). |
| 3. Remove the inspection door. |
| 4. Disconnect the sensor connector and immediately attach the tape to the body. |
| 5. Designate and disconnect hoses. Immediately attach them to a body belt. |
| 6. Locate the label position sensor, with no labels apply. |
| 7. Remove the cap nut by tapping the screwdriver resting on the teeth of the nut. |
| 8. Carefully lift the sensor, detach the filter from the tank and remove the sensor assembly with the filter. |
| 9. Remove the gasket. |
| 10. Wash the filter and inspect. When the filter is clogged or damaged, replace. |
