printable version
Coolant pump - removal and installation
1. Disconnect the battery from weight and lift the car. 2. Drain the coolant. 3. Remove the fan casing and belts mounted units. 4. On engines V6: Remove the pump pulley and the pulley - damper to the crankshaft, remove the cover of a gear belt. 5. Remove the bolts from the pump (photo). 6. Remove the pump, remove the old seal.
| 7.3 Checking the backlash of the pump shaft |
| 8.5b pump bolts on engines V6 |
| 8.7 Details of the coolant pump V6 engine 1. zedneprivodnyh A / m 2. Laying 3. For all-wheel drive and / m |
7. When assembling lubricate the gasket sealant and install the Black cylinder (see photo). 8. Tighten bolts evenly to the specified torque. 9. The rest of the operations are performed in reverse order. Adjust the tension of the belts, wash down with liquid, warm drigagel and make sure there are no leaks. If necessary, add a liquid.
|