printable version
Cooling System - general information
By the cooling system includes a radiator with a safety valve, pump, thermostat, expansion tank and hoses (pictured). Circulation of fluid in the motor is provided by a centrifugal pump mounted in the front of the cylinder block. The heated liquid heated valve body and intake manifold. On vehicles with automatic transmission in the bottom of the radiator mounted transmission fluid cooler. For vehicles with air conditioning installed in front of the radiator condenser. The impeller of the cooling fan is driven by a hydraulic clutch. On the part of car clutch integrated thermostat, ie the fan is switched on after the engine warms when the impeller is brought into engagement with the shaft by a coil spring termobimetallicheskoy. Coupling not folding, care for her is not required.
| 1.2 Cooling system 4-cylinder engines 1. Thermostat 2. From heater 3. heater 4. The housing flap 5. The valve thermostat |
| 3.5 The correct position of the thermostat during installation |
| 3.9 The thermostat is set to vent (1) or vibrating valve (2) are facing upward. |
| 3.14 Thermostat V6 engine |
|