REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Terrano II (from 1985 to 1999 model year)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Nissan
	Terrano 2
		Operation and Maintenance
		Maintenance Vehicle
		The four-cylinder engine
		Engines VS
		All engines
		Systems of cooling, heating, ventilation and air conditioning
		Fuel and an exhaust system
		The system of electric motor
		Emission of exhaust gases
		Manual transmission
		Automatic Transmission
			Technical data
			Total information
			Link transmission control - adjustable
			The blocking switch - check and adjustment
			Kick-down - switch - adjustment
			Stem vacuum diaphragm - adjustable
			The rear oil seal - replacement
			Automatic transmission - removal and installation
		Coupling the propeller shaft and rear axle
		Chassis car with wheel formula 4x4
		Brakes
		Suspension and steering
		Body and trims
		Electrical system

Technical data

Technical data

Transmission since 1987 .:
Rear-wheel drive and / m 4-cylinder engine	L4N71B
Rear-wheel drive and / m with a V6 engine	E4N71B
All-wheel drive and / m:
1987	L3N71B
1988	RE4R01A or RL4R01A

Total information

The beating of the drive plate	not more than 0.5 mm
Setting dimension A for the torque converter
up to 1990	35 mm
1991	at least 26.0 mm
Mark fluid and refilling	See. Ch. 1

Tightening torques

Torque converter bolts	40
Housing Bolts torque converter to the engine
All cars before 1990	40
Cars with V6 engine with 1991:
Top 4 bolts	40
The lower 4 bolts	thirty
Bolts blocking switch	5.5
Lock nut control rod transmission (since 1987):
Rear-wheel drive and / m with a floor selector	10
All-wheel drive and / m with a floor selector	4-5.5
With the selector knob on the steering column	10