1. Lift the car and fix on supports. |
2. Loosen the clamping brackets between the catalyst and middle silencer. |
3. Install the exhaust pipe in such a position that it is parallel to the cross beam and the distance x was the same on both sides of the exhaust pipe. |
4. The rear muffler with the rear exhaust pipe is positioned horizontally relative to the ground. |
Front-wheel drive cars |
| 5. Slide the exhaust pipe into the clamping bracket to the mark and (arrow 1). |
Cars with an engine 1,6-I with manual transmission |
6. Slide the exhaust pipe into the clamping bracket to the mark s (arrow 2). |
7. Tighten the clamping bracket 40 Nm. Spring clip should be placed horizontally to the left side of the car. |
8. Lower the vehicle. |