1. Prepare the required volume of cooling fluid from 50% water and 50% antifreeze and anticorrosion additive G12. |
Gasoline engines 1,6 / 1,8 / 2,3-I and diesel engines. |
2. Connect the water return pipe to the oil heat exchanger and fix its collar. |
3. Screw in the screw plug coolant drain hole in the radiator and tighten its demanded moment. |
4. Establish the bottom mudguard of a motor compartment. |
5. Lower the car. |
6. Move the temperature control of the heating system at maximum temperature. |
| 7. Pour coolant in the reserve tank up to max. |
8. Start the engine and hold it for 2 minutes at 1500 revs / min. |
9. Close the expansion tank cap. |
10. Run the engine at idle and warm up it to turn on the electric radiator fan. |
11. Turn off the engine and allow it time to cool down. |
12. Check the coolant level and, if necessary, finish it to norm. |