add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Passat B3 / B4 (c 1988 and 1996 model year)

general info. full specifications. diagnostics. hints. tips. tricks
Volkswagen Passat B3 / B4
Home
 
Volkswagen
Passat B3 / B4
Operation of the vehicle
Maintenance
Engines
Cooling
The power supply system
Ignition system
Coupling
Transmission
Manual Transmission
Overview
Removing gearbox
Installing gearbox
Dismantling gearbox
Dismantling, check and assemblage of a primary shaft
Output shaft
Val backing
Differential
The gear change mechanism
Install the input shaft end play
Setting the axial backlash of a secondary shaft
Assembling the gearbox
Gear control
Adjusting the gearshift
Checking the oil level in the gearbox
Automatic transmission
Features powertrain vehicles with four-wheel drive Passat Syncro
Drive the front wheels
Suspension
Steering
Brakes
Wheels and tires
Heating, ventilation and air conditioning
Electrical
Body
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Val backing



Val backing
Fig. 8.30. Val reverse 1 - clutch; 2 - Needle roller bearings; 3 - a gear wheel of a backing; 4 - a lock ring; 5 - a gear wheel of a backing; 6 - reversing the shaft; 7 - Needle roller bearings; 8 - the holder of the shaft; 9 - Washer


The holder shaft reverse
Fig. 8.31. The holder shaft reverse


Check the condition of both roller needle bearings. Replace if worn or damaged. The bearing of the clutch housing Xpress stripper. Was molded by an appropriate bearing mandrel. Check the condition of the shaft and gears. If worn or damaged, replace them. When installing the gear Achieve their proper orientation. Val (Fig. 8.30) backing is removed together with the two shafts of the transmission. When assembling the transmission, replace the bolts of the shaft (Figure 8.31)




« previos page
Output shaft
next page »
Differential

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.