 printable version
Fuel filter
The fuel filter is installed behind the right side of the body on the floor. When removing the filter may leak fuel, so it is necessary to observe the necessary precautions. To replace the filter, proceed as follows: - To establish the car on supports and substitute a container under the filter; - Compress the fuel hoses 1 (Fig. 123) their respective ferrules and cut the hose clamps 2 cutters, side cutters (to use when installing the clamps with fastening bolts);
| Fig. 123. Fuel filter: 1 - the connection of the hose; 2 - hose clip; 3 - the bolt; 4 - clip; 5 - fuel filter
|
- Unscrew the bolt fastening 3 and remove the clamp; - Disconnect the hose from the fuel filter and remove it. The filter is filled with fuel that may leak. Observe the direction of the filter. The arrow indicates the direction of the flow of fuel; - Install the new filter on the hose in accordance with the direction of the arrow, and gently tighten the bolts fastening clamps; - Set a filter to clamp on the threaded connection and fully tighten the bolts of clamps; - After the end of a short drive, and then check the tightness of the hoses.
| 
