Check and adjust handbrake

Check operation of the parking brake as follows:

- Full braking the car should be achieved by pulling the lever on 5-7 teeth;

- Check the operation of the pawl, as well as on / off indicator light in the instrument cluster.

Adjusting the parking brake is performed as follows (Fig. 2.77):

- Remove the glove tray at the rear of the console and the rubber cover in the middle;

- Remove the three screws and remove the back of the console;

- Check the location of the rocker on the cable, if necessary, check the parking brake cables and a support;

- Turn the adjusting nut handbrake so that the lifting arm (on support) touched the stopper;

- Make sure that the central parking brake cable is always taut;

- Set the console in place.