REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
		Suspension
		Body
		The air conditioning system
			Technical data
			Test drive the air conditioning system
			Connecting pipelines
			Quick couplings
			Testing the air conditioning system located in the vehicle
			Removing and installing compressor
			Drive mode control
			Drive Mix
			Drive intake
			Sensor channel
			Compressor
			Magnetic Coupling
			The two-regime relay of pressure
			The refrigerant (R-134A)
			Basic maintenance of the cooling system
			Troubleshooting
		Electrical equipment
		Brakes
		Electric schemes

printable version

Drive mode control

If the mode switch is selected ventilation mode, the automatic control unit sends a signal to select the drive mode control. Electric motor drive signal is carried out the provisions laid down in the control mode.

Check

PERFORMANCE ORDER

1. Check whether the motor will earn after filing () on the contact (1) and (-) to the contact (2). Check also the change in direction of rotation is reversed when the polarity of the supply.

2. In case of failure of the electric motor replace it.

Position of the contacts	Mode
P1	Ventilation
P2	Ventilation / heating
P3	Heating
P4	Defroster / heater
P5	Defroster

« previos page
Removing and installing compressor

next page »
Drive Mix