REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Clarus (1995 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Clarus
		Maintenance
		Engines FE DOHC and DOHC T8
		Greasing system
		Cooling
		The power supply system and release
			Technical data
			Throttle
			Intake manifold
			Adjusting accelerator cable
			System of pressurisation with changeable length of an inlet path - VICS (FE DOHC)
			The valve control system of frequency of rotation of idling
			The elements of the exhaust system
			Monitoring systems and decrease in toxicity of the fulfilled gases
			Description of construction
			Preliminary checks of the engine
			Self-diagnosis function
			Fault codes
			Emission of exhaust gases
			Crankcase ventilation (PCV)
			Check valve crankcase ventilation (PCV)
			The system EVAP
			Checking system EVAP
			Check valve system EVAP
			Checking the active charcoal filter
			:20. Check valve double
			Checking fuel vapor separator
			Check valve fuel vapor
			Exhaust gas recirculation (EGR)
			Check EGR
			Check of the electromagnetic valve (EGR)
			The control valve (EGR)
			System of pressurisation with changeable length of an inlet path (engine FE-DOHC)
			The vacuum chamber
			One-way shut-off valve
			Airflow Meter
			Coolant temperature
			Throttle Position Sensor
			The main relay
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		ACP G4A-EL
		AKP 50-40 LE
		Axes and power shafts
		Steering
		Wheels and tires
		Suspension
		Body
		The air conditioning system
		Electrical equipment
		Brakes
		Electric schemes

printable version

Monitoring systems and decrease in toxicity of the fulfilled gases

Location of control and reduction of emissions in the engine compartment of cars with engine T8 DOHC

1 - control unit (PCM);
2 - Air mass meter;
3 - nozzle;
4 - coolant temperature sensor;
5 - the valve control system idle speed;
6 - the main relay;
7 - the ignition coil;
8 - the radiator fan relay;
9 - the relay of the fuel pump;
10 - diagnostic connector;
11 - double pressure switch;
12 - solenoid valve pressurisation with changeable length of an inlet path;
13 - control valve EGR;

14 - drive system pressurisation with changeable length of an inlet path;
15 - the fuel filter;
16 - PCV valve;
17 - solenoid valve canister purge;
18 - carbon adsorber;
19 - the oxygen sensor;
20 - the relay of the air conditioner;
21 - the ignition distributor;
22 - throttle position sensor;
23 - a pressure regulator;
24 - solenoid valve EGR.

Location of control and reduction of emissions in the engine compartment of cars with engine FE DOHC

1 - control;
2 - Air mass meter;
3 - nozzle;
4 - coolant temperature sensor;
5 - the valve control system idle speed;
6 - the main relay;
7 - the ignition coil;
8 - the radiator fan relay;
9 - the relay of the fuel pump;
10 - diagnostic connector;
11 - control valve EGR;

12 - the fuel filter;
13 - PCV valve;
14 - carbon adsorber;
15 - solenoid valve canister purge;
16 - the oxygen sensor;
17 - the relay of the air conditioner;
18 - the phase detector;
19 - throttle position sensor;
20 - a pressure regulator;
21 - solenoid valve EGR;
22 - the crankshaft position sensor.

« previos page
The elements of the exhaust system

next page »
Description of construction