add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Magentis / Optima (2000 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Magentis
Home
 
Kia
Magentis
Engines
Lubrication System
Cooling system
The control and toxicity
Fuel system
Ignition system
Coupling
Transmission
Power shafts, axles
Suspension
Steering
Brakes
Body
Technical data
Front bumper
Rear bumper
Hood
Sound signal
Horn relay
Exterior Lights
Spotlight
High level brake light
The outer section of the rear combination lamp
The inner section of the rear combination lamp
Replacing bulbs lights
Replacing bulbs top stoplight
Replacing bulbs license plate light
Replacement of lamps of external section of the rear combination lamp
Replacement of lamps of internal section of the rear combination lamp
Wipers and windshield washer
Windshield washer hose
Engine windshield washer
Sprayers
Wiper Arm
Replacing the wiper blades
Traction wiper
Wiper Motor
The front door
Windows
Conformal door seal
Door hinges and door lock strike plate
Backdoor
The trunk lid
Lock lid
Cover lid
Device combination
Repair of the instrument cluster
Switches
Dashboard
The control panel heating and ventilation
Ducts
Floor ducts
The front seats
Front seatback
Front seat
Rear seat
Seat belts
Buckle front seat
Front shoulder belt
Rear seat belts
Rear seat belt buckle
Shoulder rear seat belt
Antenna
The top furnish of a forward rack
The bottom furnish of the central rack
The top furnish of the central rack
Troubleshooting
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

The trunk lid



The boot lid is attached to the body with two hinges. The two hinges are connected with each other by two absorber towers and bolted.

Two joined by two hinge strut helps to open and hold open the trunk lid.

Impact plate keeps the boot lid in the closed position.

Waterproofing strip lid prevents moisture and dust into the trunk. The latch is attached in the center of the base of the trunk lid. The position tailgate can be adjusted.

Withdrawal

PERFORMANCE ORDER

Removing the lid spend with the assistant.

1. Remove the upper and lower jaws of the strut.

2. Remove the strut from the hinge.

3. Remove the cover and disconnect the electrical harness connector.
4. Support rear lid in the open position.

5. Remove the four screws on the hinges and tailgate Remove the trunk lid.

Setting

PERFORMANCE ORDER

Install tailgate spend with the assistant.

1. Installation is spent to sequences, return to removal.
2. Hand tighten the bolts fastening lid hinges.
3. Close the lid of the trunk.

4. Check and, if necessary, adjust the position of the lid relative to adjacent surfaces before tightening the bolts.

Torque: 7-11 N ??? m

5. Check the relative position of the lock lid and lock the shock plate. If necessary, loosen the bolts and moving the shock plate, adjust its position.

Torque: 7-11 N ??? m




« previos page
Backdoor
next page »
Lock lid

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.