 printable version
Belt drive power steering pump
Check
| PERFORMANCE ORDER | | 1. Check the drive belt power steering pump for cracks, deterioration and development. If necessary, replace a belt. |  | 2. Measure the belt tension by pressing with a force of 98 N (10 kg) in a place located on identical removal from pulleys and measure a belt deflection. If necessary, adjust the belt tension. Deflection of a belt drive power steering pump
New: 8-9 mm
Former use: 9-10 mm | | 3. The special adaptation measure a belt tension. |
|
Tension adjustment
| PERFORMANCE ORDER | | 1. Loosen the screws A, B and C. Turn the adjusting bolt D adjust the belt tension. |  | 2. Tighten the screws C, A and B torque. Torque:
A: 37,2-51,9 N ??? m
Q: 37,2-51,9 N ??? m
C: 37,2-51,9 N ??? m |
|
Replacement
| PERFORMANCE ORDER | | 1. Loosen the screws A, B and C. | | 2. Turn the adjusting bolt D loosen the belt tension. | | 3. Remove the belt. | | | 4. Install new belt and adjust the belt tension. |
|
|
