| 1. Check the work surface and chamfer the valve seat for the following defects:
- roughness; - Burn-out; - Pitting; - Cracks. |
| 2. Special cutting tool 45 ?� restore a working edge of the valve seat. |
3. Apply a special composition Dychem blue on a working facet of the valve and the valve and let dry composition. |
4. Install the valve in the valve seat, push and rotate by 360 ?�. If the blue structure is not completely removed from a working facet of the valve, replace the valve. If the blue structure is not completely removed from a working facet of the valve seat, re-treat with the valve seat. |
| 5. Measure the width of a working facet of the valve. Width: 0,97-1,57 mm |
6. Using a special abrasive powder, grind the valve and valve seats. |
A warning Be sure to clean the valves and valve seats of the remnants of the abrasive powder.
|