printable version
Carter couplings and components of the gearbox TE DOHC
A warning Needlessly do not remove oil seals. Carter couplings and components of the gearbox TE DOHC
1 - the outer ring of the bearing; 2 - O-ring; 3 - an external ring of the bearing; 4 - socket; 5 - a bolt; 6 - plate; 7 - trumpet; 8 - a bolt; 9 - the gear change; 10 - cylindrical pin; 11 - a rod of a gear change; 12 - Case; 13 - selector; 14 - a sealing ring; 15 - a bolt; 16 - a cover; 17 - breather;
| 18 - speed sensor; 19 - a bolt; 20 - speedometer drive mechanism; 21 - a sealing ring; 22 - an external ring of the bearing; 23 - cylindrical pin; 24 - a shaft of the lever of a backing; 25 - the lever of a backing; 26 - oil drain plug and washer; 27 - an external ring of the bearing; 28 - spring diaphragm; 29 - shim; 30 - an external ring of the bearing; 31 - shim; 32 - a sealing ring; 33 - the switch of light of a backing; 34 - oil passage |
Removal of the outer ring of the bearing (front side primary shaft) PERFORMANCE ORDER | | After installing stripper OK130 170 012 in the outer ring of the bearing, remove the bearing outer race. |
|
Removal of the lever of the reversing shaft PERFORMANCE ORDER | 1. pliers, remove the cylindrical pin. |
| 2. Protect shaft lever backing cloth and pliers, remove it. |
|
Removing the stem O-ring gear PERFORMANCE ORDER | | A screwdriver and a hammer, remove the stem O-ring gear. |
|
A warning When removing the sealing ring does not damage the clutch. Removing the socket of the outer ring of the bearing of a secondary shaft
PERFORMANCE ORDER | 1. Remove the outer ring of the bearing, raising it with the bell. | A warning If necessary, a screwdriver, remove the outer ring of the bearing of a secondary shaft.
| 2. Insert the screwdriver into the outer ring of the bearing of a secondary shaft clutch. | | 3. Remove the outer ring of the bearing. |
|
Removal of a sealing ring of a primary shaft A warning When removing the sealing ring does not damage the clutch.
PERFORMANCE ORDER | | Use a screwdriver to remove a sealing ring of a primary shaft. |
|
Removing the O-ring Differential PERFORMANCE ORDER |
| Use a screwdriver to remove a sealing ring of differential. |
|
Removing the outer ring of the bearing of differential PERFORMANCE ORDER | 1. Place into the outer ring of the bearing of differential stripper OK130 170 012. | | 2. Remove the outer ring of the bearing of differential. |
|
Installation of a sealing ring of differential
PERFORMANCE ORDER | Using the mandrel OK201 170 AA1, establish the nest the gearbox oil sealing ring of differential. |
|
Removal of a sealing ring of a drive of a speedometer
PERFORMANCE ORDER | | Use a screwdriver to remove a sealing ring of the speedometer. |
|
|