REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
			Technical data
			Checking the oil BF DOHC
			Checking the oil TE DOHC
			Change of oil
			Replacement of an oil sealing ring
			Removing and installing transmission
			Dismantling, check and assemblage of the fifth / reverse gear and back cover BF DOHC
			Dismantling, check and assemblage of the fifth / reverse gear and back cover TE DOHC
			Carter couplings and components of the gearbox BF DOHC
			Carter couplings and components of the gearbox TE DOHC
			A primary shaft of transmission BF DOHC
			A primary shaft of transmission TE DOHC
			A secondary shaft of transmission BF DOHC
			A secondary shaft of transmission TE DOHC
			Selecting shims
			Differential
			The gear change mechanism
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

Checking the oil TE DOHC

PERFORMANCE ORDER

1. Lift the car and fix it in a horizontal position.
A warning When checking the oil level, the vehicle must be in a horizontal position.
	2. Remove the oil check the oil level.
	3. Check the oil level, which should be near the lower edge of the threaded hole for checking the oil level plug.
4. If the oil level is low, add the required amount of oil required.
5. Replace the plug check the oil level a new washer and screw cap in the gearbox housing. Torque: 40-58 N ??? m
6. Lower the car.