|
printable version
Removal, service and installation of the jet bar
Withdrawal | - Post the car off the ground.
- Remove the rear wheels.
- Support the rear axle jack.
- Turn out fixing bolts and remove the lever needs to be replaced.
|
|
Service | - Check rod for deformation, cracks and other mechanical damage, assess the condition of rubber plugs. In case of need replace sleeve or lever assembly.
- Pressing off the spindle and the pressing of the rubber bushings made by means of a special device (see. - before installing the new plug wet a soap solution.
|
|
Setting | - Installation is in the reverse order - Ensure compliance with the Specifications Chapter Suspension and steering the efforts of a tightening of threaded fasteners.
|
|
|
|