printable version
Adjusting the seats and head restraints
The seat and head restraint The design of car seats guarantees maximum comfort sitting in their person while providing conditions for the most effective performance of its functions belts and airbags. Soft padding and backrest provides additional protection for the driver and passengers in emergency situations. Choose the location of the seat also has an impact on the safety of the person sitting in it. For example, when there is excessive displacement of the front seat forward increases the risk of injury while sitting airbag deployment, as well as the risk of ejection through the windscreen in a frontal collision. Offset driver's seat back affects the usability controls while driving. The increase will worsen the seatback lock body harness - the more the backrest tilted back, the greater the chance slip body sitting under the lap section of the belt during a severe frontal impact, and the harder it may be injuries. Fix the front seat as far as the remote (convenient for driving) from the steering wheel / dashboard position back in the upright position. Head restraints prevent injury to the cervical spine and head during a rear impact. Headrest be adjusted in height so that the top section is flush with the upper edge of the ear seated. Adjusting the front seats | | - To move the front seat in a horizontal plane, pull up the lever located under the front edge of the seat cushion, then slide the seat assembly to the desired position and release the lever. To check the reliability of fixing the seat in the new position, try to move it.
|
| - To adjust the angle of the seat spinkiperednego leaned forward slightly, pull the lever on the outside of the seat, and then lean back to the desired position and release the lever.
|
| - In the 3-door model (Convertible) to facilitate entry and exit of rear passengers need to fold down the backrest of the front passenger seat - Pull up the lever located at the base of the back on the outside of the assembly seats, or press on the pedal, the rear side of the same lever. In this assembly seat will move forward, it will fall back on the pillow - do not forget to return the seat to its original position.
|
| - The back of the driver's seat is additionally equipped with an adjustable lumbar support. To select the optimum stop position, turn the lever on the right side wall of the back. By turning the lever forward bump stops increasing, and vice versa.
|
| - For lifting the headrest just pull it up; for lowering - click the tab and lower the headrest.
|
|
|
Adjusting and folding rear seats | | - To adjust the angle of the rear seat back slightly lean back and pull the stop located at the base of the outside sidewall of the back. Lean back to the desired angle and release the lock. After adjusting confirm that the stopper has returned to its original position.
|
- To increase luggage space provided folding rear seat. Pull with one hand up one of the locks near the rear headrests, second hand add the appropriate section of the backrest, after removing from the seat belt, - to prevent damage to the lock or pull it when lowering the backrest. Operating in a similar manner, fold the second section of the backrest.
| - Grasp both hands on the back edge of the rear seats folded cushion and pull it up, transferring the seat in an upward position. Remove from special pockets in the backs of the sidewalls of the retaining cords and secure them with hinge on the heads equipped with B-pillar on the body behind the anchor assemblies front belts.
|
|
|
|