 printable version
Replacing spark plugs
It requires a special tool: - Mandrel Socket wrench for spark plugs, for example, HAZET 2776. Must be purchased following wear parts: - 4 or 6 corresponding to the spark plugs.
| PERFORMANCE ORDER |  | 1. Remove the spark plug. |  | 2. Measure the gap between the probe electrode (2). Specification: 0.8 mm. In the new spark plugs, usually, the gap between the electrodes is adjusted correctly. | | 3. To adjust the gap between the contacts bend side electrode (1). For this purpose there is a simple, practical tool (3), in the absence of a hammer tap the side in the direction of the ground electrode. | | 4. When bending, keep a small screwdriver collar thread candles, in any case, not on the central electrode (4), or the electrode is damaged. | | 5. Replace the spark plug. |
|
|
