add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz C-Class (W203, 2000 issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz W203
Home
 
Mercedes-Benz
W203
Introduction
Instruction Manual
Routine maintenance
Engine
Cooling and heating
The power supply system and release
Electric motor
Manual gearbox
Automatic Transmission
Coupling and power shafts
Brakes
Suspension and steering
Specifications
Suspension front wheels
Suspension rear wheels
The angles of the wheels of the car
The steering and airbags
The steering and airbags - the general data and security measures
Safety precautions when working with airbag
Removing and installing airbag unit on the steering wheel
Removing and installing steering wheel
Removal and installation of tie rod
Removing and installing a protective cover of steering
Body
Onboard electric
 


Hit Counter by Digits


print page printable version

Removing and installing a protective cover of steering



Withdrawal

PERFORMANCE ORDER

1. Remove the tie rod (4), refer to the appropriate section.

2. Open and remove the clamps (2) and (3) the cover (1). Check the condition of clamps, if necessary, replace the clamps.
3. Remove the cover.
4. Check for corrosion and play in the toothed rack gear and the internal hinge. If there is corrosion rack and pinion mechanism must be replaced complete. If worn, replace the ball joint inner tie rod axial joint (work HUNDRED).


Setting

PERFORMANCE ORDER

Installation is performed in reverse order of removal.





« previos page
Removal and installation of tie rod
next page »
Body

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.