1. Open the tailgate.
2. Remove the clip from the expander strap handles (1).
3. Remove the 2 tabs of the opening for the handle and pull the bar to the handle of the tailgate.
4. Pull the lower trim (2) down from the tailgate and remove.
5. Remove the (3) retaining rope left and right side of the shelf facing a window.
6. Peel and remove with a plastic wedge, for example, HAZET 1965-20 side trim frame (4) left and right of the rear window of the holder brackets (5).
7. Remove the upper trim (6) from the bottom of the holder brackets (7) and remove facing upwards. It does not break the plastic strips inside.
8. Remove the cover (8) from the city center facing the tailgate (9). At the same time put a plastic wedge and remove the bottom cover of the three holders (10).  | The cover (8) in the illustration shows the increased size.
|
9. Remove the screws (11) and the bottom of the back cover from the lining (9).
10. Remove the trim at the bottom and remove it with the tailgate up. | 
